The GEEKOTO AT24Pro Dreamer is one of the best tripods out there with its maximum height of 77.5 inches and lightweight design. This tripod is constructed with a durable and high-quality aluminum alloy which provides damage resistance in even the harshest of rugged outdoor terrains.
Any photographers who need a durable, lightweight tripod with a pretty tall height of 77.5 inches should absolutely consider the GEEKOTO AT24Pro Dreamer 77″ tripod. Qualities and features exhibited with this tripod can’t be easily found and if it is, it won’t be the all-in-one tripod like this one.
The tripod has the ability to snap into three different leg angles for a wider range of shooting and can also convert into a monopod. These features are only some of the wonderful abilities that this little tripod holds.
Design
The GEEKOTO AT24Pro Dreamer is a compact tripod that is constructed out of a high-quality lightweight aluminum alloy. Aluminum alloys are held in high regard for its lightweight nature and ability to withstand against dents and dings that would otherwise occur with other materials.
The total weight of the tripod is 3.37lbs, which is stunning as it holds so much within it in order to extend to its max height of 77.5 inches, a minimum height of 19 inches, and the load capacity is a surprising 17.6lbs. This tripod can support some of the beefiest camera setups out there today.
As mentioned previously, this tripod holds the ability to convert into a monopod. This monopod mode comes in at a humongous 81.5 inches and a minimum size of 35.43 inches. This monopod is perfect for heavier loads that need hand-held stabilization.
One other quality to the monopod, one that isn’t entirely related to photography, is that it can be used for hiking. Yes, that’s correct. The monopod can be used as a hiking stick to traverse mountainous or flat, rocky terrain.
The GEEKOTO AT24Pro Dreamer also comes with a built-in dual center axis and 360-degree panorama ball joint for the crispest possible panoramic photos.
The GEEKOTO AT24Pro Dreamer 77” Tripod in Use
The GEEKOTO 77″ tripod will change how any outdoor photographer views outdoor tripods. The quality aluminum alloy used to construct the tripod gives it such a lightweight feel and the features can’t be forgotten either. A 360-degree ball mount for panoramic photos, a dual center axis, a monopod mode, and the inverted camera mount are only some of the highlights to the wondrous qualities that the GEEKOTO AT24Pro Dreamer exhibits.
Briefly mentioned earlier, the tripod supports three alternative leg angles to support a wider range of photography stances, as well as an inverted camera mount. These three angles are 20°, 50°, and 80° and fully give photographers use of the tripod when outdoor areas are crowded with rocks and other debris is in the way.
An inverted camera mount option is crucial for field photographers who use macro lenses for very close photography. The inverted mount on the GEEKOTO 77″ tripod also allows photographers to capture photos at a low angle without having to lay down or hold the camera manually in an awkward squat position.
One doesn’t have to worry about the setup with the GEEKOTO 77″ tripod as it has a feature to aid in its own setup. Setting up is as easy as it can be as it uses flip-locks for quick release setups. The flip-locks are made in a convenient buckle style and are constructed out of durable ABS plastic.
How Does It Compare to Competitors?
The GEEKOTO AT24Pro Dreamer, when compared to its similarly designed competitors, leaves them all behind it and in the dust. It’s aluminum alloy construction isn’t one that can be easily beaten due to its lightweight total of 3.37lbs, yet can support a max height of 77.5 inches and a max height monopod of 81.6 inches.
A tripod that can be considered a similar competitor to the GEEKOTO 77” tripod is the Gitzo Systematic Series 3. Both tripods have a considerable amount of care put into its construction with high-quality materials and both tripods have a unique design to the leg releases.
Even though the leg releases on the Gitzo Systematic Series 3 are of quality design and construction, it isn’t a quick-release design by far. The leg release on the Gitzo model tripod is a time-consuming design that falls to the superior quick-release buckle leg locks on the GEEKOTO tripod.
However, in the end, the GEEKOTO tripod isn’t beaten by the Gitzo Systematic Series 3 because of its maximum height, monopod mode, inverted camera mount option, and 360-degree panoramic ball head mount.
| GEEKOTO AT24Pro Dreamer | Gitzo Systematic Series 3 GT3543LS | |
| Quick Release | Yes | No |
| Weight | 3.34lbs | 2.29lbs |
| Max Height | 77.5-inch tripod / 81.5-inch monopod | 57.4 inches |
| Folded Length | 19 inches | 22.4 inches |
| Monopod | Yes | No |
Conclusion
In conclusion, the GEEKOTO AT24Pro Dreamer 77” travel tripod is the victor with its maximum height, compact and lightweight frame, and numerous features. The lightweight aluminum alloy gives all photographers who use it the ability to travel further distances without a tripod that weighs them down and its built-in features provides for so much more in different types of photography shoots.
A monopod, that can be assembled in a matter of minutes with the disassembly of its central axis screw, is one of its strongest features. The second best feature, which is extremely hard to choose so it is tied with two, is its inverted camera mount option and the panoramic ball head mount for perfect 360° panorama shots.
Photographers won’t be disappointed when they choose to venture out into the field with the GEEKOTO AT24Pro Dreamer. Its compact nature and abundance of features for different photography tastes and styles will provide assistance to capture some of the greatest outdoor photography shots possible.
